To leave application form
Disk harrows BDM 6,5х4 P are designed for surface tillage to a depth of up to 12 cm, weed cutting, crushing and burying of crop residues into the soil, autumn plowing, cultivation of clover fallows, pre-planting cultivation and moisture conservation in soil.
Disk harrows are semi-mounted (semi-trailed) diskers with 4-row arrangement of disks, each on an individual leg. The operating tool is the concave disk BDM, diameter 560 mm, manufacturer: “Bellota” (Spain); other elements are: reinforced bearing assembly (bearing housing BDM), tool leg (“sleeve – leg” lubrication) and disk approach angle adjuster. The disk harrow is also equipped with a spiral slicker that enables to adjust a depth of cultivation without changing disk approach angles.
.gif)
The slicker is attached to levers by means of the bearing assembly and silent blocks.
Each disk has an individual positioning axis; for each row of disks, disk approach angles can be adjusted within a range of 0º to 30º, thus, setting the effective width of the disks. At that, disks act as plows and earth-boards, which provides for better turning of soil being opened, its breaking up and loosening, as well as reduction of a required pulling force of a tractor. Each leg has a lubrication groove.
.gif)
Disk harrows BDM are completed with disks, manufactured by “Bellota”, Spain: 560 mm or 590 mm. They also have reinforced own-produced, high-quality and highly reliable bearing housings and legs that are manufactured with the use of new and state-of-the-art equipment.
|
Hourly performance, ha/h |
6.0-7.0 |
|
Operating speed, km/h |
10-12 |
|
Travelling speed, km/h |
Max. 25 |
|
Effective width, m |
6.5 |
|
Weight, kg |
5250 |
|
Number of cutting elements in a row, pcs |
15 |
|
Number of cutting elements, pcs |
60 |
|
Dimensions, m: width / length / height |
6.57 / 6.9 / 1.56 |
|
Combined with tractor classes, t |
5 t.s. 300...350 h.p. |
|
Staff required |
1 tractor driver |
|
Type |
Trailed |